Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Install the manual transmission gear position sensor seal.
Position the manual transmission gear position sensor (4) to the transmission.
- Install the 4 manual shift shaft position switch bolts (2) and tighten to 10 N.m (89 lb in).
- Connect the manual transmission gear position sensor electrical connector (1).
- Install the transmission control to the vehicle. Manual Transmission Control Replacement
- Perform the manual transmission gear position sensor learn procedure. Gear Position Sensor Learn
CAUTION:
Refer to Fastener Caution .