Shift Control Shaft Cover Assembly Assemble

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Install the shift control shaft cover seal (1).
Install the shift control lever (4) and the shift shaft (2).
Install the shift control lever shaft pin (3).
Courtesy of GENERAL MOTORS COMPANY

Install the shift control shaft cover bolt (1) and tighten 20 N.m (15 lb ft).
Install the manual transmission shift lever rod (3).
Install the manual transmission shift lever pin (2).
Install the shift shaft retainer (4).