Conditions for Running the DTC
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Condition 1 under "Setting" correlates with condition 1 under "Running"
- DTCs related to the following system/component = Not Set{If equipped}
- B14A Automatic Transmission Output Speed Sensor/B115 Vehicle Speed Sensor
- B25B Clutch Pedal Position Sensor
- B26 Crankshaft Position Sensor
- B34 Engine Coolant Temperature Sensor
- B75 Mass Airflow Sensor
- Q6 Camshaft Position Actuator Solenoid Valve
- Q38 Throttle Body
- Engine Coolant Temperature = Warmer than -9°C (15°F)
- Clutch Pedal = Released
Condition 1
- Current Gear Previous Gear
- Engine Speed = Greater than 1, 200 RPM
- Engine Torque = Greater than 120 N.m (89 lb ft)
- Vehicle Speed = Greater than 20 km/h (12 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met
Condition 2
- Engine Torque = Greater than 500 N.m (369 lb ft) - For greater than 1.2 s
- Vehicle Speed = Greater than 15 km/h (9 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met
Condition 3
- Current Gear Previous Gear
- Engine Speed = Greater than 1, 200 RPM
- Engine Torque = Greater than 120 N.m (89 lb ft)
- Vehicle Speed = Greater than 15 km/h (9 MPH)
Frequency the DTC runs = Continuously - After the running conditions are met