Conditions for Running the DTC

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Accelerator Pedal Position = Greater than 8%
Clutch Pedal Position Sensor = Greater than 70% - Released
Gear Position Sensor Learn Status = Learned
Engine Torque = Greater than 50 N.m (37 lb ft)
Ignition and Start Switch Signal = On
Output Shaft Speed Sensor = Greater than 120 RPM
{P0729} Gear Ratio = 0.64 - 0.73: 1 - Calculated
{P0731} Gear Ratio = 2.25 - 2.41: 1 - Calculated
{P0732} Gear Ratio = 1.57 - 1.66: 1 - Calculated
{P0733} Gear Ratio = 1.17 - 1.26: 1 - Calculated
{P0734} Gear Ratio = 0.96 - 1.05: 1 - Calculated
{P0735} Gear Ratio = 0.78 - 0.87: 1 - Calculated
{P076F} Gear Ratio = 0.41 - 0.50: 1 - Calculated

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1.5 s