Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. SIR Disabling and Enabling
Use a flat bladed plastic trim tool to depress the steering wheel airbag access hole cover detents to remove the 2 steering wheel airbag access hole covers (1).
Steering Wheel Airbag Bolt (1) - Remove [2x]
- Release the connector position assurance (CPA) retainer.
- Disconnect the electrical connectors.
- Steering Wheel Airbag (2) - Remove
Loosen the steering wheel bolt (1) so that 2 - 3 threads are engaged.
- Disconnect the electrical connector.
- Wiggle the steering wheel until the wheel disengages completely.
- Steering Wheel Bolt (1) - Remove
- Steering Wheel (2) - Remove
Steering Wheel Bolt (1) @ Automatic Transmission Manual Shift Auxiliary Position Switch - Remove [4x]
- Steering Wheel Bolt (2) @ Steering Wheel Shroud - Remove [4x]
Steering Wheel Shroud (1) - Remove
- Disconnect the electrical connectors.
Remove the heated steering wheel module (1) from the steering wheel shroud (2).