Circuit/System Description
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
The Ethernet bus 4 is used to communicate between K73 Telematic Control Module and A11 Radio or K56 Serial Data Gateway Module depending on the Radio type or vehicle configuration.
- K56 Serial Data Gateway Module and K73 Communication Interface Module for vehicles equipped with IOR radio.
- A11 Radio and K73 Communication Interface Module for vehicles equipped with other radios such as IOK, IOS, IOT, IOU, IOV.
This Ethernet harness consists of a single twisted copper pair of wires (circuits 7210 & 7211) from point to point.