Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil fill cap.
Intake Manifold Cover Bolt (1) - Remove [2x]
- Lift up on the front of the intake manifold cover (2).
Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Disconnect the positive crankcase ventilation tube (1) at the evaporative emission canister purge solenoid valve, and the positive crankcase ventilation valve. Plastic Collar Quick Connect Fitting Service