LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Battery Distribution Engine Compartment Fuse Block Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5314636Courtesy of GENERAL MOTORS COMPANY

    Battery Distribution Engine Compartment Fuse Block (2) - Install

  2. Retaining Tab (1) - Engage [2x]
  3. GM5314604Courtesy of GENERAL MOTORS COMPANY

    Forward Lamp Wiring Harness (10) - Install [2x]

    4. CAUTION:

    Refer to Fastener Caution

  4. Forward Lamp Wiring Harness Terminal Nut (2) - Install and tighten [2x] - Fastener Specifications
  5. Engine Wiring Harness (9) - Install [2x]
  6. Engine Wiring Harness Terminal Nut M6 (3) - Install and tighten - Fastener Specifications
  7. Engine Wiring Harness Terminal Nut M8 (4) - Install and tighten - Fastener Specifications
  8. Auxiliary Generator Battery Jumper Cable (8) - Install
  9. Auxiliary Generator Battery Jumper Cable Nut (5) - Install and tighten - Fastener Specifications
  10. Battery Positive Cable (7) - Install
  11. Battery Positive Cable Nut (6) - Install and tighten - Fastener Specifications
  12. Battery Distribution Engine Compartment Fuse Block Cover (1) - Install
  13. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals