LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Lighting System - Repair Instructions) >> Repair Instructions >> Front Floor Console Compartment Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5448547Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  2. Front Floor Console Compartment Lamp (1) - Install
  3. Ensure the retaining tab has fully secured.
  4. GM5448546Courtesy of GENERAL MOTORS COMPANY

    Secure the front floor console compartment lamp wiring harness (1) to the front floor console compartment.

  5. GM5504203Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Armrest (3) - Install

  6. Attach the front floor console cup holder to the front floor console armrest (3).
  7. CAUTION:

    Refer to Fastener Caution .

  8. Front Floor Console Armrest Bolt (2) - Install and tighten [7x] - Fastener Specifications
  9. Front Floor Console Cup Holder Bolt (1) - Install [5x] - Fastener Specifications
  10. GM5485756Courtesy of GENERAL MOTORS COMPANY

    Connect all electrical connectors.

  11. Front Floor Console Rear Trim Panel (2) - Install
  12. Front Floor Console Rear Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  13. GM5487916Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Install

  14. GM5644700Courtesy of GENERAL MOTORS COMPANY

    Install the automatic transmission control lever knob (1) then press down to engage the retainer.

  15. Carefully pull upward on the automatic transmission control lever knob (1) to ensure that the retainer is engaged.
  16. GM5487915Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate Bolt (4) - Install and tighten [2x] - Fastener Specifications

  17. Connect the electrical connector (3).
  18. Insert the transmission control lever boot (2) into the front floor console trim plate.
  19. Shift the transmission through each gear and ensure that the shift lever knob operates properly.
  20. Front Floor Console Variable 1 Liner (1) - Install
  21. GM5482681Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) back into the instrument panel.

  22. GM5482680Courtesy of GENERAL MOTORS COMPANY

    Engage the tabs (3) on both sides of the front floor console.

  23. Connect the front floor console harness connector on both sides of the front floor console.
  24. Front Floor Console Bolt (1) - Install and tighten [6x] - Fastener Specifications
  25. Front Floor Console Bracket Bolt (2) - Install and tighten [2x] - Fastener Specifications
  26. GM5479957Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (1) - Install

  27. Return the seat to its original position.
  28. GM5479956Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (1) - Install

  29. Return the seat to its original position.