Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Tank Filler Pipe (1) - Install
Evaporative Emission Canister Purge Hose (7) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Vent Hose (6) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Filler Evaporative Emission Valve Hose (5) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Filler Hose (3) @ Fuel Tank Filler Pipe (4) - Install
- Fuel Tank Filler Hose Clamp (2) - Tighten - Fastener Specifications
- Fuel Tank Filler Pipe Ground Bolt (1) - Install and tighten - Fastener Specifications
Evaporative Emission Pipe Retainer (2) @ Body - Install [2x]
- Fuel Tank Filler Pipe Ground Bolt (1) - Install and tighten - Fastener Specifications
Evaporative Emission Canister Purge Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Canister Air Inlet Hose (1) - Connect - Plastic Collar Quick Connect Fitting Service
- Rear Wheelhouse Liner-Right Side - Install - Rear Wheelhouse Liner Replacement
- Fill the fuel tank.
- Inspect for fuel leaks.
CAUTION:
Refer to Fastener Caution .