Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve the fuel system pressure. Fuel Pressure Relief
- Disconnect the quick connect coupling of the fuel feed pipe from the fuel feed pipe. Use a shop towel in order to catch any remaining fuel that may leak. Metal Collar Quick Connect Fitting Service
Install the CH-37287-1A adapter (2) between the fuel feed pipe and the fuel feed pipe.
- Install the J-34730 - 1A gauge (1) to the CH-37287-1A Fuel Pressure Gauge Adapter (2), and tighten securely.
- Turn ON the ignition in order to pressurize the fuel system.
- Turn OFF the ignition.
- Check for any fuel leaks.
CAUTION:
Refer to Component Fastener Tightening Caution .