Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON/Vehicle in Service Mode, connect an appropriate device to the X80 Accessory Power Receptacle.
- Verify the device is powered by the X80 Accessory Power Receptacle.
- If the device is not powered
Refer to Circuit/System Testing
- Go to next step: If the device is powered
- If the device is not powered
- A fault is not currently present and may be an intermittent condition.