Shift Control Shaft Cover Assembly Assemble
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the shift control shaft cover seal (1).
- Install the shift control lever (4) and the shift shaft (2).
- Install the shift control lever shaft pin (3).
- CAUTION:
Refer to Fastener Caution .
Install the shift control shaft cover bolt (1) and tighten. Fastener Specifications
- Install the manual transmission shift lever rod (3).
- Install the manual transmission shift lever pin (2).
- Install the shift shaft retainer (4).