Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Driver and Passenger Seat Lumbar Control Switch (2) - Install
- {If equipped} Driver or Passenger Seat Lumbar Support Actuator Knob (1) - Install
Connect the electrical connector.
- Front Seat Cushion Outer Finish Cover (2) - Install
- Front Seat Cushion Outer Finish Cover Bolt -Rear (1) - Install and tighten - Fastener Specifications
Front Seat Cushion Front Finish Cover (3) - Install
- Front Seat Cushion Outer Finish Cover Bolt -Front (2) - Install and tighten - Fastener Specifications
- Front Seat Cushion Front Finish Cover Bolt (1) - Install and tighten - Fastener Specifications
- Return the seat to the original position.
CAUTION:
Refer to Fastener Caution .