Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTC U3002 51 is not set.
- If DTC U3002 51 is set
- Program the K43 Power Steering Control Module.
- Verify the DTC does not reset.
- If the DTC resets, replace the K43 Power Steering Control Module.
- Go to next step: If the DTC does not reset
- All OK.
- Go to next step: If DTC U3002 51 is not set
- All OK.