Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
Rear Wheel Speed Sensor Bolt (1) - Remove
- Rear Wheel Speed Sensor (2) @ Knuckle - Remove
{ If equipped } Rear Disc Brake Pad Wear Sensor (2) @ Retainer (1) - Remove [2x]
Retainer (1) - Remove [2x]
Retainer (1) - Remove [2x]
Disconnect the electrical connector. (1)
- Retainer (1) - Remove
- Remove the rear wheel speed sensor from the vehicle.