Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the rear wheel speed sensor into the vehicle.
- Retainer (2) - Install
- Connect the electrical connector. (1)
Retainer (1) - Install [2x]
Retainer (1) - Install [2x]
{ If equipped } Rear Disc Brake Pad Wear Sensor (2) @ Retainer (1) - Install [2x]
Rear Wheel Speed Sensor (2) @ Knuckle - Install
- Rear Wheel Speed Sensor Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
CAUTION: