Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Positive Crankcase Ventilation Tube (1) - Install NEW
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Push down on the front of the intake manifold cover (2).

CAUTION:

Refer to Fastener Caution .

Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
Install the oil fill cap.