Special Tools

• DT-50921  Output Carrier Lifter
• J-26941  Bushing and Bearing Remover

Equivalent regional tools: Special Tools

1. Courtesy of GENERAL MOTORS COMPANY

   Output Carrier Thrust Bearing Assembly (1) - Remove

2. Install DT-50921  Output Carrier Lifter (2) and J-26941  Bushing and Bearing Remover (3) to the Output Carrier Assembly (4).
3. Output Carrier Assembly (4) - Remove
4. Output Carrier Thrust Bearing Assembly (5) - Remove

5. Courtesy of GENERAL MOTORS COMPANY

   Output Shaft Seal (1) - Remove and DISCARD

6. Output Shaft Seal (2) - Remove and DISCARD [2x]