Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Connect the electrical connector and install the wiring harness retainer.
- Hood Primary Latch Release Cable (3) - Install
- Hood Primary and Secondary Latch (2) - Install
- Hood Primary and Secondary Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications
Radiator Air Upper Baffle (2) - Install
- Radiator Air Upper Baffle Retainer (1) - Install [7x]