Hood Adjustment
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Hood Hinge Bolt - Loosen [4x]
Adjust the hood (1) in order to obtain an even gap on both sides between the hood and the fenders, headlamps and the front bumper fascia:
- Hood to front fender (a) 3.0 mm ±.75 mm (0.12 in ± 0.03 in)
- Hood to headlamp (b) 3.0 mm ± 1 mm (0.12 in ± 0.04 in)
- Hood to front bumper fascia (c) 6.1 3.0 mm ±.1.5 mm (0.12 in ± 0.06 in)
- Hood Hinge Bolt - Tighten [4x] - Fastener Specifications
Hood Primary and Secondary Latch Bolt (1) - Loosen [2x]
- Hood Primary and Secondary Latch - Adjust
- Adjust the hood bumpers as necessary to obtain the adjustment.
Hood Primary and Secondary Latch Bolt (1) - Tighten [2x] - Fastener Specifications
CAUTION:
Refer to Fastener Caution .