Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a double layer of masking tape around the perimeter of the painted surfaces.
Disconnect the front side door wiring harness (1) electrical connector.
Front Side Door Check Link Bolt (1) - Remove
Mark the location of the front side door hinges with a grease pencil to aid in alignment during installation.
- Support the door before removing the hinge fastener.
- Front Side Door Hinge Bolt - Door Side (1) - Remove [4x]
- With the aid of an assistant, remove the front side door (2).
- Transfer components as necessary.