Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

NOTE:
With V03, they will have 3 bolts. Without V03, they will have 4 bolts.

Front Tire Front Air Deflector Bolt (1) - Remove [4x]
Front Tire Front Air Deflector (2) - Remove
If equipped with AWD:
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Components removed for graphic clarity.

Engine Front Splash Shield Screw (2) - Remove [5x]
Engine Front Splash Shield Retainer (1) - Remove
Engine Front Splash Shield (3) - Remove
If equipped with RWD:
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Components removed for graphic clarity.

Engine Front Splash Shield Retainer (2) - Remove [2x]
Engine Front Splash Shield Screw (1) - Remove [5x]
Engine Front Splash Shield (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Air Deflector Bolt (1) - Remove [3x]
Front Bumper Fascia Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Components removed for graphic clarity.

Front Wheelhouse Liner Screw (1) - Remove [7x]
Front Wheelhouse Liner Retainer (2) - Remove [4x]
Front Wheelhouse Liner (3) - Remove
Windshield Washer Container Cell 51905
Courtesy of GENERAL MOTORS COMPANY

Front Fender Insulator Retainer (1) - Remove
Pull the front fender insulator (2) down and out from the front fender.