Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front End Sheet Metal Cross Brace (3) - Install
- Install the engine wire harness retainers to the front end sheet metal cross brace.
- Front Suspension Strut Upper Mounting Nut (2) - Install and tighten [2x] Fastener Specifications
- Front End Sheet Metal Cross Brace Bolt (1) - Install and tighten [3x] Fastener Specifications
Radiator Air Upper Baffle (3) - Install
- Radiator Air Upper Baffle Bolt (2) - Install and tighten [2x] Fastener Specifications
- Radiator Air Upper Baffle Retainer (1) - Install [5x]
CAUTION:
Refer to Fastener Caution .