LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front End Sheet Metal Cross Brace Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5864524Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Upper Baffle Retainer (1) - Remove [5x]

  2. Radiator Air Upper Baffle Bolt (2) - Remove [2x]
  3. Radiator Air Upper Baffle (3) - Remove
  4. GM5839407Courtesy of GENERAL MOTORS COMPANY

    Front End Sheet Metal Cross Brace Bolt (1) - Remove [3x]

  5. Front Suspension Strut Upper Mounting Nut (2) - Remove [2x]
  6. Release the engine wire harness retainers from the front end sheet metal cross brace.
  7. Front End Sheet Metal Cross Brace (3) - Remove
  8. GM5839405Courtesy of GENERAL MOTORS COMPANY
  9. Front End Sheet Metal Diagonal Brace Bolt (1) - Remove [3x]
  10. Release the forward lamp wire harness retainers from the front end sheet metal cross brace bracket.
  11. GM5839406Courtesy of GENERAL MOTORS COMPANY

    Front End Sheet Metal Cross Brace Bracket (1) - Remove

scientia non olet · About LEMON Manuals