Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Generator Battery Jumper Cable(2) - Install
- Battery Positive Cable Nut(1)@Starter Solenoid - Install and tighten - Fastener Specifications
- Electrical Connector(4) - Connect
- Starter(3) - Install
Starter Bolt(2) - Install and tighten[2x] - Fastener Specifications
- Starter Stud(1) - Install and tighten - Fastener Specifications
Auxiliary Generator Battery Jumper Cable - Install
- Auxiliary Generator Battery Jumper Cable Terminal Nut (1) - Install and tighten - Fastener Specifications
- Retainer(3) - Engage
Engine Oil Cooler Seal(2) - Install NEW[2x]
- Engine Oil Cooler(1) - Install
Engine Oil Cooler Bolt(1) - Install and tighten[4x] - Fastener Specifications
Engine Oil Cooler Coolant Inlet Hose(3)@Engine Oil Cooler - Install
- Engine Oil Cooler Coolant Outlet Hose(2)@Engine Oil Cooler - Install
- Hose Clamp(1) - Engage[2x] - Hose Clamp Replacement Guidelines - Spring Type
- Lower the vehicle.
- Fill the engine oil to the proper level with NEW engine oil. Engine Oil and Oil Filter Replacement (RWD)
- Fill the cooling system. Cooling System Draining and Filling (LSY GE 47716)Cooling System Draining and Filling (LSY Static Fill)Cooling System Draining and Filling (LSY with V03 Static Fill)Cooling System Draining and Filling (L3B Static Fill)Cooling System Draining and Filling (L3B GE 47716)Cooling System Draining and Filling (LSY with V03 GE 47716)Cooling System Draining and Filling (LF4 Static Fill)Cooling System Draining and Filling (LF4 GE 47716)
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution