Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Engine Wiring Harness Junction Block(2) - Install
- Retaining Tab(3) - Engage[4x]
- Engine Wiring Harness Junction Block Bolt(1) - Install and tighten - Fastener Specifications
Engage the retaining tabs (1) and install the engine wiring harness fuse block cover (2).
Battery Distribution Engine Compartment Fuse Block(2) - Install
- Retaining Tab(1) - Engage[2x]
Forward Lamp Wiring Harness(10) - Install[2x]
- Forward Lamp Wiring Harness Terminal Nut (2) - Install and tighten[2x] - Fastener Specifications
- Engine Wiring Harness(9) - Install[2x]
- Engine Wiring Harness Terminal Nut M6 (3) - Install and tighten - Fastener Specifications
- Engine Wiring Harness Terminal Nut M8 (4) - Install and tighten - Fastener Specifications
- Auxiliary Generator Battery Jumper Cable(8) - Install
- Auxiliary Generator Battery Jumper Cable Nut(5) - Install and tighten - Fastener Specifications
- Battery Positive Cable(7) - Install
- Battery Positive Cable Nut(6) - Install and tighten - Fastener Specifications
- Battery Distribution Engine Compartment Fuse Block Cover(1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution