Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the engine wiring harness fuse block bracket (2) by engaging the 3 retaining tabs (1), to the body wiring harness junction block bracket (3).
Engage the 2 retaining covers (2), and install the electrical connectors (1).
Engine Wiring Harness Junction Block(2) - Install
- Retaining Tab(3) - Engage[4x]
- Engine Wiring Harness Junction Block Bolt(1) - Install and tighten - Fastener Specifications
Retaining Tab(1) - Engage[2x]
- Engine Wiring Harness Fuse Block Cover(2) - Install
Battery Positive Cable(3) - Install
- Auxiliary Generator Battery Jumper Cable(2) - Install
- Battery Positive Cable Nut(1)@Engine Wiring Harness Junction Block - Install and tighten - Fastener Specifications
Battery Distribution Engine Compartment Fuse Block(2) - Install
- Retaining Tab(1) - Engage[2x]
Forward Lamp Wiring Harness(10) - Install[2x]
- Forward Lamp Wiring Harness Terminal Nut (2) - Install and tighten[2x] - Fastener Specifications
- Engine Wiring Harness(9) - Install[2x]
- Engine Wiring Harness Terminal Nut M6 (3) - Install and tighten - Fastener Specifications
- Engine Wiring Harness Terminal Nut M8 (4) - Install and tighten - Fastener Specifications
- Auxiliary Generator Battery Jumper Cable(8) - Install
- Auxiliary Generator Battery Jumper Cable Nut(5) - Install and tighten - Fastener Specifications
- Battery Positive Cable(7) - Install
- Battery Positive Cable Nut(6) - Install and tighten - Fastener Specifications
- Battery Distribution Engine Compartment Fuse Block Cover(1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution