Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Courtesy of GENERAL MOTORS COMPANY

Fuse Block Cover(1) - Remove
Auxiliary Generator Battery Jumper Cable Nut(2) - Remove
Battery Positive Cable Nut(3) - Remove
Battery Negative Cable Ground Bolt(4) - Remove
Retainer(5) - Disengage[3x]
Auxiliary Generator Battery Jumper Cable(6) - Reposition away
Courtesy of GENERAL MOTORS COMPANY

Retainer(1) - Disengage[3x]
Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Retainer(1) - Disengage[2x]
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector(1)@Starter(2) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable Nut(1)@Starter Solenoid - Remove
Auxiliary Generator Battery Jumper Cable(2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable Nut(1)@Generator - Remove
Auxiliary Generator Battery Jumper Cable(2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Generator Battery Jumper Cable Terminal Nut (2)@Starter Stud - Remove
Auxiliary Generator Battery Jumper Cable(1) - Remove
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Generator Battery Jumper Cable(1) - Remove