Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil fill cap.
Lift up on the front of the intake manifold cover (1).
Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Electrical Connector (1) @ Engine Coolant Temperature Sensor (2) - Disconnect
Disconnect the electrical connector at the sensor.
- Positive Crankcase Ventilation Hose Connector Bolt (1) - Remove [2x]
- Retainer (2) - Unclip [2x]
- Positive Crankcase Ventilation Hose (3) - Remove
- Positive Crankcase Ventilation Hose Fitting Seal (4) - Remove and DISCARD [2x]