LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (3 Of 3)) >> Repair Instructions >> Positive Crankcase Ventilation Hose/Pipe/Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5135894

    Positive Crankcase Ventilation Hose Fitting Seal (4) - Install NEW [2x]

  2. Positive Crankcase Ventilation Hose (3) - Install
  3. Retainer (2) - Install [2x]
    4. CAUTION:

    Refer to Fastener Caution .

  4. Positive Crankcase Ventilation Hose Connector Bolt (1) - Install and tighten [2x] - Fastener Specifications
  5. GM5135762

    Electrical Connector (1) @ Engine Coolant Temperature Sensor (2) - Install

  6. Connect the electrical connector at the sensor.
  7. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  8. GM5335087
    NOTE:

    Ensure the engine sight shield retainers fully engage the intake manifold cover studs.

    Push down on the front of the intake manifold cover (1).

  9. Install the oil fill cap.
scientia non olet · About LEMON Manuals