LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (3 Of 3)) >> Repair Instructions >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5068106

    Oil Level Indicator Tube Seal (2) - Install NEW

  2. Oil Level Indicator Tube (1) - Install
  3. GM5136547
    CAUTION:

    Refer to Fastener Caution .

    Oil Level Indicator Tube Bracket Bolt (1) - Install - Fastener Specifications

  4. Electrical Connector (1) @ Oil Level Indicator Tube (3) - Install
  5. GM5335764

    Oil Level Indicator (1) - Install

  6. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  7. GM5335087
    NOTE:

    Ensure the engine sight shield retainers fully engage the intake manifold cover studs.

    Push down on the front of the intake manifold cover (1) as indicated by the arrow.

  8. Install the oil fill cap.
scientia non olet · About LEMON Manuals