Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
| Illustration | Tool Number/Description |
|---|---|
| EN-21867-850 J-21867-850 KM-498-B KM-6106 83 93 852 Oil Pressure Gauge Adapter |
|
| EN-22738-B GE-22738-B J-22738-B J-9666 Valve Spring Tester |
|
| EN-23951 J-23951 Valve Manometer |
|
| EN-28410 J-28410 Gasket Remover |
|
| EN-28467-518 J-28467-518 Engine Support Adapter - Main Support Beam |
|
| EN-35667-A J-35667-A Cylinder Head Leakdown Tester |
|
| EN-36857 J-36857 Engine Lift Bracket |
|
| EN-38416-2 J-38416-2 Crankshaft Button |
|
| EN-43963 J-43963 KM-6149 Valve Spring Compressor (off car) |
|
| EN-45059-A Angle Meter |
|
| EN-45299 J-45299 Engine Pre-Luber |
|
| EN-46109 Engine Front Cover Installation Guide Pins |
|
| EN-46112 Chain Tensioner Retention Pin |
|
| EN-46116 Valve Stem Seal Remover |
|
| EN-46495 Valve Stem Seal Installer |
|
| EN-50717 Valve Spring Compressor |
|
| EN-51007 Engine Support Fixture |
|
| EN-51749 Compression Gauge Tester Kit |
|
| EN-51768 Engine Support Fixture Adapter Bolts M8 |
|
| EN-52059 Engine Support Fixture Adapter Bolts M10 |
|
| EN-52436 Timing Chain Tensioner Retention Tool |
|
| EN-52461 Camshaft Torque Reaction Tool |
|
| EN-52461-200 Camshaft Torque Reaction Tool 2.7L Adapter |
|
| EN-52462 - A Camshaft Alignment Tool |
|
| EN-52476 Flywheel Lock and Alignment Tool |
|
| EN-52483 Guide Pins |
|
| EN-52486 Oil Press Gauge Adapter |
|
| EN-52525 Connecting Rod Guide Set |
|
| EN-52593 Chain Tensioner Retention Pin |
|
| EN-571-B MKM-571-B Dial Gauge |
|
| EN-8062 J-8062 KM-348 Valve Spring Compressor - Head Off |
|
| EN-8087 J-8087 Cylinder Bore Gauge |
|
| GE-21867-A J-21867-A Oil Pressure Gauge Kit |
|
| GE-42220 J-28428-E J-42220 Universal 12V Leak Detection Lamp |
|
| GE-52200-A Propulsion System Lift |
|
| J-8037 Piston Ring Compressor |
|
| J-36854 Heavy Duty Automotive Engine Stand |