Terminal Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

1.2 Terminals

Courtesy of GENERAL MOTORS COMPANY

Use a small screwdriver to press down on the locking tabs on the wire cover, to release the cover.
Courtesy of GENERAL MOTORS COMPANY

Spread the cover open and lift it away from the connector to remove it.
Courtesy of GENERAL MOTORS COMPANY

Insert a small flathead screwdriver into the front of the connector into TPA.
With the tip of the screwdriver in the tab of the TPA, gently rotate the tool to release the lock.

Courtesy of GENERAL MOTORS COMPANY
Courtesy of GENERAL MOTORS COMPANY

Identify female terminal (1), flex lock (2), and removal window (3).
Courtesy of GENERAL MOTORS COMPANY

Insert the terminal removal tool J-38125-560 into the terminal cavity (1), deflect the terminal lock (2), while the terminal lock deflected, gently pull on the wire to remove the terminal from the connector (3).

2.8 Terminals

Courtesy of GENERAL MOTORS COMPANY

Use a small screwdriver to press down on the locking tabs on the wire cover, to release the cover.
Courtesy of GENERAL MOTORS COMPANY

Spread the cover open and lift it away from the connector to remove it.
Courtesy of GENERAL MOTORS COMPANY

Insert a small flathead screwdriver into the front of the connector into TPA.
Courtesy of GENERAL MOTORS COMPANY

With the tip of the screwdriver in the tab of the TPA, gently rotate the tool to release the lock.
Courtesy of GENERAL MOTORS COMPANY

Identify female terminal (1), flex lock (2), and removal window (3).
Courtesy of GENERAL MOTORS COMPANY

Insert the terminal removal tool J-38125-36 into the terminal cavity (1), deflect the terminal lock (2), while the terminal lock deflected, gently pull on the wire to remove the terminal from the connector (3).