Terminal Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
1.5 Terminals
Insert the J-38125-12A tool (1) behind the TPA (2) and gently pry away from the connector housing to release the TPA (3).
Insert the J-38125-560-A terminal release tool straight into the channel of the connector cavity (1) until the terminal is released, then gently pull on the wire to remove the terminal (2) from the connector housing.
5.8 Terminals
Insert the J-38125-12A tool (1) behind the TPA (2) and gently pry away from the connector housing to release the TPA (3).
Insert the J-38125-212 terminal release tool straight into the channel of the connector cavity (1) until the terminal is released, then gently pull on the wire to remove the terminal (2) from the connector housing.