Connector Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Slide the CPA to the released position
 Courtesy of GENERAL MOTORS COMPANY
|
Push locking tab down (1). Rotate the cam lever (2) to the released position by rotating it until a click is heard of felt.
 Courtesy of GENERAL MOTORS COMPANY
|
Once the cam lever is fully released gently pull the connector assembly away from the component to remove it.