LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Wire And Connector Repair) >> Repair Instructions >> 1.2 MCON-CB Series, Sealed Connectors (Female) >> Connector Removal Procedure

Connector Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5662793Courtesy of GENERAL MOTORS COMPANY

    Slide the CPA to the released position

  2. Press down on the latch release so that the cam lever can be rotated to remove the connector.
  3. Once the cam lever is fully released the connector can be removed from the mating component by gently pulling on it.
scientia non olet · About LEMON Manuals