LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Wire And Connector Repair) >> Repair Instructions >> 1.2 MCON, 2.8 MCP Series Connectors (Female) >> Connector Removal Procedure

Connector Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5831299Courtesy of GENERAL MOTORS COMPANY

    Push up on the CPA until it reaches the fully released position.

  2. GM5831300Courtesy of GENERAL MOTORS COMPANY

    Push the release tab up (1) to unlock lever, then push lever (2) after it is released and continue to rotate it to the fully released position.

  3. Remove the connector from the mating component.
scientia non olet · About LEMON Manuals