Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Park Lamp Switch parameter changes between Active and Inactive while turning the park lamps ON and OFF with the Turn Signal Switch.
- If the parameter does not change
Refer to Turn Signal Switch Malfunction.
- Go to next step: If the parameter changes
- If the parameter does not change
- Verify the park/tail lamps turn ON and OFF when commanding the appropriate scan tool control function ON and OFF:
- Left Front Park Lamp
- Right Front Park Lamp
- Left Tail Lamp
- Right Tail Lamp
- If one or more of the lamps do not turn ON and OFF
Refer to Park Lamps Malfunction.
- Go to next step: If all of the lamps turn ON and OFF
- Verify the license plate lamp(s) turn ON and OFF when commanding the License Plate Lamp ON and OFF with a scan tool.
- If the license plate lamps do not turn ON and OFF
Refer to License Plate Lamps Malfunction.
- Go to next step: If the license plate lamps turn ON and OFF
- If the license plate lamps do not turn ON and OFF
- A fault is not currently present and may be an intermittent condition.