Conditions for Setting the DTC
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
DTC C10DA 16
The BCM detects low voltage on the brake pedal position sensor signal circuit 5361.
DTC C10DA 17
The BCM detects high voltage on the brake pedal position sensor signal circuit 5361.
DTC C10DA 27
The BCM detects a high signal rate of change from the brake pedal position sensor.
DTC C10DA 54
The BCM detects missing calibration of the brake pedal position sensor.
DTC C10DA 78
The BCM detects an alignment or incorrect adjustment of the brake pedal position sensor.
DTC C10DA 84
The BCM detects a signal that is below an allowable range in the brake pedal position sensor signal circuit 5361.
DTC C10DA 85
The BCM detects a signal that is above an allowable range in the brake pedal position sensor signal circuit 5361.