Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Place a clean suitable drain pan under the windshield washer solvent container to recover the windshield washer solvent.
Windshield Washer Solvent Container Filler Tube Bracket Bolt (1) - Remove
- While twisting, pull inboard on the windshield washer solvent container filler tube (2) to remove it from the windshield washer solvent container grommet.
- Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
- NOTE:
- Quantity of fasteners may vary based on option content.
NOTE:Left side shown, right side similar.
Engine Front Splash Shield Retainer - Right Side (2) - Remove
- Engine Front Splash Shield Bolt - Right Side (1) - Remove [4x]
- Engine Front Splash Shield - Right Side (3) - Remove
- NOTE:
Left side shown, right side similar.
Front Wheelhouse Liner Bolt - Right Side (1) - Remove [3x]
- Rocker Panel Protector - Right Side (2) - Remove
- NOTE:
Left side shown, right side similar.
Front Bumper Fascia Air Deflector Bolt - Right Side (1) - Remove [4x]
- Front Bumper Fascia Air Deflector - Right Side - Outer (2) - Remove
- NOTE:
Left side shown, right side similar.
Front Wheelhouse Liner Retainer - Right Side (1) - Remove [3x]
- Front Wheelhouse Liner Bolt - Right Side (2) - Remove [9x]
- Front Wheelhouse Liner - Right Side (3) - Remove
Disconnect the electrical connectors.
- Release the windshield washer solvent container wiring harness retainers (1) and reposition the windshield washer solvent container wiring harness as necessary.
- Windshield Washer Pump Hose (2) - Disconnect and reposition
- NOTE:
Support the windshield washer solvent container while removing the windshield washer solvent container bolts.
Windshield Washer Solvent Container Bolt (1) - Remove [2x]
- Windshield Washer Solvent Container (2) - Remove