Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Slide the windshield washer pump hose and windshield washer solvent container wiring harness through the slit in the body side air outlet seal (3) to install.
- Body Side Air Outlet Seal (3) - Install
- Install the 2 body side air outlet seal retainers (2).
- Install the windshield washer solvent container wiring harness retainer (1).
Position the rear section of the right front wheelhouse liner (4) to the original location.
- Engine Front Splash Shield Bolt (3) - Install and tighten [3x] - Fastener Specifications
- Front Wheelhouse Liner Bolt (2) - Install and tighten - Fastener Specifications
- Front Wheelhouse Liner Retainer (1) - Install [3x]
- Install the right front tire and wheel assembly. Tire and Wheel Removal and Installation
CAUTION:
Refer to Fastener Caution .