LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Wiper System And Washer System) >> Repair Instructions >> Air Inlet Grille Panel Extension Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5417116Courtesy of GENERAL MOTORS COMPANY

    Apply two layers of masking tape around the top edge of the service part to prevent paint damage.

  2. Using a suitable plastic trim tool, carefully release the air inlet grille panel extension clips.
  3. Remove the air inlet grille panel extension (1) from the air inlet grille panel and upper front fender.
scientia non olet · About LEMON Manuals