LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Wiper System And Washer System) >> Diagnostic Information and Procedures >> Washer Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify there are no DTCs set.
    • Go to next step: If no DTCs are set 
  3. Verify the scan tool Windshield Washer Switch parameter changes between Active and Inactive when pressing the Windshield Washer Switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing - Windshield Wiper and Washer Switch Malfunction.

    • Go to next step: If the parameter changes 
  4. Verify the G24 Windshield Washer Pump activates and deactivates when commanding the Windshield Washer Relay Active and Inactive with a scan tool.
    • If the G24 Windshield Washer Pump does not activate or does not deactivate 

      Refer to Circuit/System Testing - Windshield Washer Pump Malfunction

    • Go to next step: If the G24 Windshield Washer Pump activates and deactivates 
  5. A fault is not currently present and may be an intermittent condition.