Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. SIR Disabling and Enabling
Rear Seat Cushion (1) - Remove - Rear Seat Cushion Removal and Installation
- Fold the rear seat back to the downward position.
- Access the rear seat back bolster retainer lock (1) through a slot in the upper portion of the bolster.
- Slide the rear seat back bolster retainer lock (1) toward the front of the vehicle.
Rear Seat Back Bolster Nut (1) - Remove
- Squeeze the rear seat back bolster retainer to release it.
- Rear Seat Back Bolster (2) - Remove
Remove the lower rear seat belt retractor bolt (1) on the side of the trim panel being replaced.
- Feed the rear seat belt retractor belt through the bezel opening in the quarter upper trim panel.
Use a flat bladed plastic trim tool to remove the quarter window trim finish panel bolt cap (1).
- Quarter Window Trim Finish Panel Bolt (2) - Remove
- Quarter Upper Trim Panel (3) - Remove