LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior Trim And Paneling) >> Repair Instructions >> Front Side Door Sill Garnish Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5421735Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    With a flat bladed plastic trim tool, start at the front and work your way back to release the clips.

  2. Instrument Panel Outer Trim Cover (1) - Remove
  3. { If equipped } Disconnect the electrical connector.
  4. GM5458216Courtesy of GENERAL MOTORS COMPANY
  5. Starting at the rear of the front side door sill garnish molding (1) pull upward at the b-pillar joint to disengage the garnish molding.
  6. Work your way forward disengaging all the front side door sill garnish molding clips then pull rearward to disengage the clip on the forward vertical wall.
  7. Front Side Door Sill Garnish Molding (1) - Remove
scientia non olet · About LEMON Manuals