Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Front Side Door Trim - Remove - Front Side Door Trim Removal and Installation
Front Side Door Trim Bolt (1) - Remove
Using a flat bladed plastic trim tool, start at the rear of the front side door armrest switch mount plate (1) and gently insert trim tool to lift the front side door armrest switch mount plate from the door trim.
- Rotate the front side door armrest switch mount plate (1) up and rearward to unhook the front retaining feature.
- Release the harness retainers to allow slack in harness, as needed.
- Disconnect the electrical connectors.
- Front Side Door Armrest Switch Mount Plate (1) - Remove
- Transfer components as necessary.