Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to SIR Warning .

WARNING:

Refer to SIR Inflator Module Handling and Storage Warning .

CAUTION:

Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.

Disable the SIR system. SIR Disabling and Enabling

Courtesy of GENERAL MOTORS COMPANY

Move the front seat fully forward.
Front Seat Belt Anchor Plate Tensioner Cover (1) - Remove
Front Seat Belt Anchor Plate Tensioner Bolt- Upper (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disengage the upper retainers on the Center Pillar Lower Trim Panel (1) and reposition slightly inboard.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
When replacing the center pillar upper trim panel, feed the seat belt through the panel.

Center Pillar Upper Trim Panel Bolt Cap (1) - Remove
Center Pillar Upper Garnish Molding Bolt (2) - Remove
Pull the trim panel (3) toward the inside of the vehicle to disengage the retainers.
Center Pillar Upper Trim Panel (3) - Remove