Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
When replacing the center pillar upper trim panel, feed the seat belt through the panel.
Pull the center pillar lower panel inboard, as needed.
- Center Pillar Upper Trim Panel (3) - Install
- Center Pillar Upper Garnish Molding Bolt (2) - Install and tighten - Fastener Specifications
- Center Pillar Upper Trim Panel Bolt Cap (1) - Install
Re-engage the upper retainers on the center pillar lower trim panel (1).
Front Seat Belt Anchor Plate Tensioner Bolt- Upper (2) - Install and tighten - Fastener Specifications
- Front Seat Belt Anchor Plate Tensioner Cover (1) - Install
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .