Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)
{ If equipped } Forward Range Radar Bracket Bolt (1) - Remove [3x]
- { If equipped } Forward Range Radar Bracket (2) - Remove
- Disconnect the electrical connector.
- NOTE:
Left side shown, right side similar.
Auxiliary Radiator Front Inlet Duct Retainer- Left Side and Right Side (1) - Remove [6x]
- NOTE:
Left side shown, right side similar.
Auxiliary Radiator Front Inlet Duct- Left Side and Right Side (1) - Reposition [2x]
- Transmission Fluid Auxiliary Cooler Bracket Bolt- Left Side and Right Side (2) - Remove [2x]
- NOTE:
Left side shown, right side similar.
Horn Bolt (1)- Left Side and Right Side - Remove [2x]
- Horn- Left Side and Right Side (2) - Reposition [2x]
Reposition the wiring harness.
- Front Bumper Impact Bar Bolt (1) - Remove [8x]
- Front Bumper Impact Bar (2) - Remove
NOTE:
Forward range radar sensor will be with the bracket.